+45 70 21 70 21

Vent venligst...

Netværkstilbehør

For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
CISCO UCS 5108 BLADE SERVER AC2 CHASSIS/0 PSU/8 FANS/0 FEX       IN SYST (UCSB-5108-AC2=)

CISCO UCS 5108 BLADE SERVER AC2 CHASSIS/0 PSU/8 FANS/0 FEX IN SYST (UCSB-5108-AC2=)


SKU: UCSB-5108-AC2=
Produkt: Server / Accessories
Forventes på lager: 20-12-2017
Beskrivelse

Cisco UCS 5100 Series Blade Server Chassis

The Cisco Unified Computing System™ (Cisco UCS™) is a next-generation data center platform that unites computing, networking, storage access, and virtualization resources into a cohesive system designed to reduce total cost of ownership (TCO) and increase business agility. The system integrates a low-latency, lossless 10 Gigabit Ethernet unified network fabric with enterprise-class, x86-architecture servers. The system is an integrated, scalable, multichassis platform in which all resources participate in a unified management domain

The Cisco UCS 5100 Series Blade Server Chassis is a crucial building block of the Cisco Unified Computing System, delivering a scalable and flexible blade server chassis for today's and tomorrow's data center while helping reduce TCO.

Cisco's first blade server chassis offering, the Cisco UCS 5108 Blade Server Chassis, is six rack units (6RU) high and can mount in an industry-standard 19-inch rack. A chassis can house up to eight half-width Cisco UCS B-Series Blade Servers and can accommodate both half- and full-width blade form factors.

Four single-phase, hot-swappable power supplies are accessible from the front of the chassis. These power supplies are 92 percent efficient and can be configured to support nonredundant, N+1 redundant, and grid-redundant configurations. The rear of the chassis contains eight hot-swappable fans, four power connectors (one per power supply), and two I/O bays for Cisco UCS 2208XP Fabric Extenders. A passive midplane provides up to 80 Gbps of I/O bandwidth per server slot and up to 160 Gbps of I/O bandwidth for two slots. The chassis is capable of supporting future 40 Gigabit Ethernet standards.

The Cisco UCS 5108 Blade Server Chassis revolutionizes the use and deployment of blade-based systems. By incorporating unified fabric, integrated, embedded management, and fabric extender technology, Cisco UCS allows the chassis to use fewer physical components, has no need for independent management, and enables greater energy efficiency than traditional blade server chassis. This simplicity eliminates the need for dedicated chassis management and blade switches, reduces cabling, and enables Cisco UCS to scale to 40 chassis without adding complexity. The Cisco UCS 5108 chassis is a critical component in delivering the Cisco UCS benefits of data center simplicity and IT responsiveness.

In addition, the Cisco UCS 5108 chassis has the architectural advantage of not having to power and cool excess switches in each chassis. With a larger power budget per blade server, Cisco can design uncompromised expandability and capabilities in its blade servers, as evidenced by the new Cisco UCS B200 M3 Blade Server, with its leading memory slot and drive capacity, and the Cisco UCS B230 M2 Blade Server, with its industry-leading 32-DIMM memory density in a half-width form factor.

Item

Specification

Height

10.5 in. (26.7 cm); 6RU

Width

17.5 in. (44.5 cm); fits standard 19-inch square-hole rack

Depth

32 in. (81.2 cm)

Blade server slots

8

Fabric extender slots

2

Fabric interconnects

4x 10 Gigabit Ethernet external ports and 8x 10 Gigabit Ethernet internal ports (Fibre Channel over Ethernet [FCoE] capable) per Cisco UCS 2200 Series Fabric Extender

Power

Four 2500W, 208V (220V outside United States) single-phase, hot-swappable, redundant power supplies, 50 to 60 Hz, with IEC-320 C20 connections

Fans

8 hot-swappable fans

Management

Managed from the Cisco UCS 6100 Series Fabric Interconnects by Cisco UCS Manager (redundant management operations when the chassis is configured with two fabric extenders)

Backplane

1.2 Tb of aggregate throughput; supports 10BASE-KR connections for 8 blades

Temperature: Operating

50 to 95°F (10 to 35°C) (as altitude increases, maximum temperature decreases by 1°C per 300m)

Temperature: Nonoperating

-40 to 149°F (-40 to 65°C); maximum altitude is 40,000 ft

Humidity: Operating

5 to 93% noncondensing

Humidity: Nonoperating

5 to 93% noncondensing

Altitude: Operating

0 to 10,000 ft (3000m); maximum ambient temperature decreases by 1°C per 300m

Altitude: Nonoperating

40,000 ft (12,000m)

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.